What Your Lead Dashboard Should Show You Every Morning (And What to Ignore)

The five numbers a contractor should check every morning, the vanity metrics to ignore, and how to run a 10 minute daily review that protects your ad spend.

What Your Lead Dashboard Should Show You Every Morning (And What to Ignore)

A contractor pays $50 to $200 per exclusive lead. Sixty leads a month is $7,200 at the middle of that range, plus ad spend going directly from your own ad account to Meta. The most expensive thing that can happen to that money is not a bad lead. It is a good lead that nobody called until Thursday.

Most contractors have access to more lead data than they have ever used. The problem is not missing information. It is that the morning screen shows forty numbers and none of them say what to do next. So the owner glances at the lead count, feels fine or feels bad, closes the tab, and goes to a job site. The leads keep aging.

A morning dashboard check has one job: catch the leads and appointments that are about to cost you money, before the day gets away from you. Ten minutes. Five numbers. Everything else is for Friday.

What does a sloppy morning check actually cost you?

Speed decides contact rate, and contact rate decides revenue. That relationship is well documented and it is the entire reason a daily check exists.

Example: you get 60 leads in a month at $120 each, which is $7,200 in lead fees. Forty-five get a call inside five minutes and contact out at 70 percent, so you reach 31.5 of them. The other 15 slip to the next day, where contact drops to roughly 30 percent, so you reach 4.5 of them. That is 36 homeowners contacted. At a 25 percent close rate on contacted leads and a $12,000 average job, you sign 9 jobs for $108,000.

Now run the same month where all 60 get called fast. You reach 42, you sign 10.5, and you bill $126,000. The 15 leads that sat cost you about $18,000 in revenue, and you already paid for every one of them.

That is the entire argument for the morning check. It is not a reporting ritual. It is $18,000 that walks out the door quietly when nobody looks at the right screen before 8 a.m.

If your dashboard cannot tell you in five seconds which leads have no contact attempt logged, it is a reporting tool, not an operating tool.

This is also why the Minyona client platform puts live lead counts, status badges, click-to-call, and urgency alerts on the first screen instead of burying them under charts. The command center answers the question an owner actually has at 7 a.m., which is "what needs a human right now."

What five numbers belong on the morning screen?

Every number on the morning view needs a threshold and an action. If you cannot write down what you will do when a number goes red, it does not belong on the morning screen.

Morning numberWhat it tells youAct when
Morning numberNew leads since last checkWhat it tells youWhether the campaign is delivering and whether anyone has touched today's batchAct whenAny lead is more than 30 minutes old with no attempt logged
Morning numberLeads with zero contact attemptsWhat it tells youThe highest-value failure in your business, already paid forAct whenCount is above zero at 8 a.m.
Morning numberAppointments sitting todayWhat it tells youWhether your reps have a full day and who is lightAct whenA rep has fewer than 2 or more than 5 in a day
Morning numberYesterday's appointments with no outcomeWhat it tells youJobs quoted and never followed, and a close rate you cannot trustAct whenAny appointment from yesterday is still marked open
Morning numberCost per booked appointment, month to dateWhat it tells youWhether the money is actually workingAct whenIt climbs above 10 percent of average job value

New leads since the last check

The raw count matters less than the timestamp on each one. You are looking for leads that came in after hours or during a busy afternoon and never got assigned. A lead delivered at 6:40 p.m. that is still unassigned at 7:30 a.m. is already thirteen hours cold.

Leads with no contact attempt logged

This is the single most important tile on the screen. Not "uncontacted," which can mean the homeowner did not answer. Specifically no attempt. A lead with three attempts and no answer is being worked. A lead with zero attempts is being ignored, and you paid full price for it. Our breakdown of why the first five minutes decide the sale covers the mechanics behind this number.

Today's appointments and who owns each one

You are checking two things: that every appointment has a named rep attached, and that the day is balanced. A rep with six appointments across ninety miles will cancel two of them by noon. A rep with one will not hit quota and you want to know before the day starts, not after.

Yesterday's appointments with no outcome logged

An appointment with no outcome is a quote nobody is chasing. It also quietly destroys your close rate math, because every open record looks like a loss at the end of the month. Thirty seconds of enforcement here is what makes every other number on the dashboard believable.

Cost per booked appointment, month to date

This is the only money number that belongs on a daily screen, and it belongs there as a trend line, not a trigger. You are watching for drift across the month, not reacting to one expensive Tuesday. Target roughly 10 percent of average job value or better as the all-in acquisition cost. If you have not set that ceiling yet, run it through the ROI math for your own numbers before you decide any number is too high.

What should you ignore in the morning?

These are not useless numbers. They are the wrong numbers for 7 a.m., because none of them change what you do before lunch.

  • Impressions and reach. Delivery data. Relevant to whoever is managing the campaign. Irrelevant to whether a homeowner gets a call today.
  • Click-through rate and cost per click. Creative diagnostics. They belong in a weekly or biweekly review alongside the creative that produced them.
  • Total leads this year. A vanity number. It feels good and it instructs nothing.
  • Website sessions and bounce rate. Useful when you are auditing a page. Useless as a daily habit.
  • Frequency and audience saturation. Real levers, checked every two to four weeks, not daily.
  • Daily cost per lead in isolation. Twelve leads on Monday and three on Tuesday is normal variance. Reacting to it is how working campaigns get killed in week two.

The test is simple. If the number goes red and your honest answer is "I would tell the marketing person," it is a weekly number. If your answer is "I would pick up the phone or call a rep," it is a morning number.

How do you run the check in ten minutes?

Same order, same time, every working day. The order matters because it goes from most perishable to least.

  1. Open the lead list filtered to the last 24 hours. Scan for anything with zero attempts. Assign or call those first, before you read anything else.
  2. Check the overnight batch specifically. Leads that arrive between 7 p.m. and 7 a.m. are the ones most likely to fall through, and they are the ones a competitor can reach first at 8:05.
  3. Look at today's appointment list. Confirm every slot has a rep, an address, and a confirmation sent. Flag any gap over three hours in a rep's day.
  4. Filter to yesterday's appointments with no outcome. Text the rep. Two minutes.
  5. Glance at month-to-date cost per booked appointment and lead volume pace. If you are at day 15 and sitting at 40 percent of the monthly lead target, that is a Friday conversation, not a panic.
  6. Close the tab. Go run your company.

That sequence works because it ends with a decision instead of a feeling. A dashboard that produces a feeling gets abandoned inside a month.

Who should actually be doing this?

If you have an office manager or a call center handling intake, they run steps one through four and you run steps five and six. If you are a two-truck operation, you run all six. Either way, one named person owns the check and it happens before the first appointment of the day. Shared ownership of a daily task means nobody does it.

Which numbers belong on a weekly or monthly review instead?

Daily is operating. Weekly is coaching. Monthly is strategy. Mixing the three is what makes dashboards unreadable.

CadenceWhat you reviewWhat the review produces
CadenceDaily, 10 minutesWhat you reviewUntouched leads, today's appointments, yesterday's outcomesWhat the review producesPhone calls made before lunch
CadenceWeekly, 30 minutesWhat you reviewCost per lead, lead to appointment rate, sat rate, no-show rate by repWhat the review producesCoaching and script fixes
CadenceMonthly, 60 minutesWhat you reviewCost per acquired job, close rate, average ticket, revenue by campaignWhat the review producesBudget and creative decisions
CadenceQuarterlyWhat you reviewChannel mix, service area, capacity vs lead volumeWhat the review producesExpansion or contraction

The weekly review is where lead-to-appointment rate lives, and it is the number most contractors should be fighting over. If 60 leads produce 18 appointments, you are at 30 percent and the problem is almost always intake speed or the script, not lead quality. Getting that number into your CRM in a way that holds up over time is the whole point of a CRM setup that actually gets used.

What breaks a daily dashboard habit?

Four things, in order of how often they happen.

Too many tiles. Twenty metrics on one screen reads as noise. The owner stops opening it within two weeks. Five numbers survive. Twenty do not.

No thresholds. A number without a threshold is decoration. "Cost per appointment: $310" means nothing until someone wrote down that the ceiling is $400.

Data the team does not enter. If reps do not log outcomes, your dashboard is fiction, and a dashboard everyone knows is fiction gets ignored faster than one that is simply ugly. Outcome logging is a management problem, not a software problem. Fix it once and the numbers start telling the truth.

Reporting that lives somewhere other than the leads. If you check numbers in one tool and work leads in another, you will stop checking the numbers. The dashboard has to be the place where you click to call, change a status, and file a dispute, or it becomes a second chore.

That last one is why the platform our clients use puts property data, status, billing and disputes on the same screens as the leads themselves. Every lead carries home value, year built, square footage, roof and exterior type, and a new homeowner flag when the property sold in the last twelve months, so the morning check and the first phone call happen in the same place.

If you want to see what a working morning view looks like on real contractor data, take a look at the platform or book a call and we will walk you through it live.

What does a good morning check look like in practice?

A roofing company running 60 leads a month opens one screen at 7:15. Four leads came in overnight, three are assigned and one is not. They assign it and it gets called at 7:30 instead of 2 p.m. Two appointments from yesterday are still open, so the owner texts both reps and gets outcomes by 8. Today shows seven appointments across two reps, one of which has a four hour gap, so the office pulls a follow-up visit forward to fill it. Month to date cost per booked appointment is $285 against an $11,000 average job, which is fine. Total time: nine minutes.

Nothing in that routine is clever. It is just the four or five decisions that get made before the day absorbs them.

The short version

Five numbers in the morning: new leads, leads with no attempt, today's appointments, yesterday's unlogged outcomes, and month-to-date cost per booked appointment. Ignore impressions, reach, click-through rate and annual totals before noon. Give every morning number a threshold and an action, keep the whole thing under ten minutes, and push cost per lead, sat rate and close rate to the weekly review where sample size actually means something.

The dashboard is not there to tell you how you are doing. It is there to tell you who to call.

If your current setup cannot answer "which leads have nobody called" in five seconds, that is the thing to fix first. Get started here and we will show you the morning view on live numbers.

Frequently asked questions

What should a contractor lead dashboard show every morning?

Five things: new leads since your last check, any lead with no contact attempt logged, today's appointments and who owns each one, yesterday's appointments with no outcome recorded, and cost per booked appointment month to date. Those are the only numbers that change what you do before lunch.

What metrics should contractors ignore on a daily basis?

Impressions, reach, frequency, click-through rate, cost per click, total leads this year, and website sessions. They are real numbers and they matter to whoever manages the campaign, but none of them tell you which homeowner is about to stop answering the phone today.

How long should a daily lead dashboard review take?

Ten minutes or less. If the morning check takes thirty minutes you will skip it inside two weeks, and a dashboard you skip is worse than no dashboard because it creates a false sense that someone is watching the leads.

Is cost per lead a daily metric or a weekly one?

Weekly at the earliest, and cost per booked appointment is the better number to watch. Daily cost per lead swings hard on small sample sizes, and reacting to a single expensive day is how contractors kill campaigns that were working fine over a thirty day window.

Why do contractor lead dashboards get abandoned?

Because they show too much. A screen with twenty tiles and four charts gives you no instruction, so the owner stops opening it. A dashboard survives when every number on the morning view has a clear threshold and a clear action attached to it.

Related Articles

Operations

What Your Intake Script Should Ask Before You Send a Truck

Operations

Tracking a Lead From Ad Click to Signed Contract: What Your Reporting Must Show

Websites

What Should a Contractor Website Cost? Price Tiers and What Each One Includes